If you’re looking for methods on how to unclog a bathtub drain without removing the stopper, we’ve got all the info you need. I will show you some of the most effective ways that will help fix your drain as quickly as possible.
To unclog bathtub drain without removing the stopper, first, use a wire hanger to try to pull out any hair or debris that is causing the clog. If this doesn’t work, fill up the tub with the hottest water possible and add about one cup of baking soda and two cups of vinegar to the tub.
If you’ve ever had a bathtub drain that was blocked, you know how frustrating it can be. There are a few different reasons your bathtub drain could be blocked. IIn this article, we’re going to look at a few methods for clearing a blocked bathtub drain.
How To Unclog Bathtub Drain Without Removing Stopper: Step By Step Guide
This is a step-by-step guide on how to unclog bathtub drain without removing the stopper.
To do this, you will need a screwdriver, hot water, vinegar, baking soda, rubber gloves, and a plunger.
Before you begin doing anything, be sure to have everything you need on hand and that the area around your drain is clear of any items that could get in the way.
- First, check your overflow plate to see if it is clear. If it isn’t clear already, use a screwdriver to remove any gunk stuck in it.
- Next, pour warm water down the drain for about 10 minutes. This will help loosen up any buildup on or near the stopper. While the water is draining as much as possible from your tub, fill a bucket with one cup of hot water, but make sure it’s not too hot!
- Then mix it with one or two teaspoons of white vinegar and baking soda.
- After you have mixed together these ingredients in your bucket, put on your rubber gloves and pour this mixture into the bathtub drain. You may need to wait at least 15 minutes before you run warm water inside the drain to help clear it out.
How To Clean A Bathtub Drain With A Non Removable Stopper
If you have a non-removable stopper, you can also try to use a plunger. They come in all shapes and sizes, and it’s worth having one that is specially made for sinks and tubs.
If you don’t have one, though, feel free to use a regular plunger with an appropriately sized rubber cup attached to the end.
Use your plunger to create suction against the drain and try to dislodge any blockage. You can do this standing up, but make sure you cover the overflow hole as well as the main drain hole with the plunger cup.
Pump up and down vigorously for about 30 seconds before pulling out the plunger cup.
Doing this should help loosen any gunk that was causing your drain to clog!
If not – repeat it! This process might take some time, but eventually, you’ll get those pipes cleared out and your bathtub draining smoothly again.
How Do You Clean a Tub Drain With a Pop-Up Stopper?
It’s important to remember that you can greatly reduce the amount of grime and buildup on your pop-up stopper by cleaning and disinfecting it regularly.
But no matter how hard you work, eventually, you’ll have to clean the tub drain with a pop-up stopper.
First, you’ll need to remove the pop-up stopper before you can clean it.
The method for removing your pop-up depends on its type, but in general, you’ll need to use some force to pull it off.
For a lift-and-turn pop-up stopper:
- Lift the knob in order to open the drain.
- Turn the knob counterclockwise until it comes off completely.
- Pull straight up on the body of the stopper in order to remove it.
- Next, clean the drain and stopper with a toothbrush, removing all buildup of soap scum, mold, and hair.
How Do You Clean a Non Removable Shower Drain?
If you can’t remove the grate of your shower drain, the best thing to do is to prepare a natural drain cleaner.
For this, you’ll need a small bucket and a liquid drain cleaner. It’s recommended that you start by pouring one cup of sodium bicarbonate down the drain.
Then pour one cup of white vinegar on top of the sodium bicarbonate. The mixture will foam up and get rid of grease, hair, and grime.
Did you know that bathtub drain is the most commonly clogged drain in your home?
The reason for this is that the bathroom is a major point of passage for hair, gunk, and other detritus that can get trapped in your pipes.
How To Unclog a Bathtub Drain With a Stopper?
Have you ever tried to take a bath in a dirty bathtub? It’s just about the worst.
You probably want to get that water flowing as soon as possible if you’re going to have any hope of enjoying your bathroom experience.
If you’re comfortable with taking apart your drain and getting your hands dirty, unclogging it is a relatively easy task.
This guide will walk you through the process step by step.
Before you get started:
You’ll need a flashlight or headlamp, pliers, and a screwdriver. Make sure to wear gloves so you don’t hurt yourself on sharp tools.
Have some paper towels on hand in case something spills or drips while you’re working.
Step 1: Remove the stopper from your tub’s drain and set it aside somewhere safe.
Step 2: Use the screwdriver to unscrew the screws on either side of the drain pipe, making sure not to lose any parts that may come off with them.
Keep track of where everything goes so you can put them back together later!
Step 3: Once both screws are off, pull out the drain pipe and remove any hair or other debris that might be blocking it up before replacing it in its original position.
How To Clean a Tub Drain Stopper
Here’s how to clean the stopper. Use dish soap or a gentle cleaner like vinegar and water (1:1) and a soft sponge or cloth to clean the stopper, rinsing with warm water as you go.
If the stopper appears very dirty, soak it in a bowl of vinegar and water overnight.
Conclusion
I hope this article on how to unclog a bathtub drain without removing the stopper has been useful.
The bathtub stopper is often the cause of a clogged drain; so proper maintenance can help prevent them.
All the solutions that we have covered are inexpensive and will only take a few minutes, which will save you valuable time that can be better spent relaxing in your bathtub.